Aluminum Heads

[slick66]

Guy's, The motor is coming out of my 66 Saty to repaint the engine bay. While it's out I thought I would do some engine upgrades. I'm thinking of putting on Aluminum Heads. This is a warmed up 383. That's what the PO told me. What are your recommendations? This will be a street car, maybe do a TT to see what I got. It's a 727 auto. Who should I buy from? Thanks for your input

[Cranky]

Wait until you get the old heads off and see what you have in it for pistons....

[hemisatellite]

If it's healthy and runs strong, leave it alone unless you want me, cranky, fugly and others like Hemi67s sending lots of advise that makes your friday paycheck disappear.

[dodgeboy8]

Put a nice set of edelbrock 84 cc on if you can mill them .050 first!

[hemisatellite]

Guy's, The motor is coming out of my 66 Saty to repaint the engine bay. While it's out I thought I would do some engine upgrades. I'm thinking of putting on Aluminum Heads. This is a warmed up 383. That's what the PO told me. What are your recommendations? This will be a street car, maybe do a TT to see what I got. It's a 727 auto. Who should I buy from? Thanks for your input

If ya wanna pay shipping and parts only, I'll do your trans for zero bux labor just to help out a fellow member. just tell me what kinda trans ya want. Gets kinda boring on the farm in winter, need something to do to keep me awake. Good Luck.