Announcement

Collapse
No announcement yet.

Torsion bar Question

Collapse
X
  • Filter
  • Time
  • Show
Clear All
new posts

  • Torsion bar Question

    I'm also building a 73 challenger that was stolen a few years back.When it was stolen they broke the torsion bar I was wondering if the bar that was broken part no UZC779L can be replaced with a Part no. JSW775L? If not can I use a matching set of the same diameter of the old ones? Thanks guys!

  • #2
    No you can't. The 779 is a different diameter than the 775. The 775/774 are both slant 6 bars (0.86" good for drag racing). The 778/779 are 0.90", which would be small block application.
    1971 Challenger - Autocross & Track Day Project
    2015 Dart GT 6spd - Daily Driver

    Comment


    • #3
      Thanks Couldn't find anything about them on the web. Knew you guys could help me

      Comment


      • #4
        Originally posted by CudaZappa View Post
        No you can't. The 779 is a different diameter than the 775. The 775/774 are both slant 6 bars (0.86" good for drag racing). The 778/779 are 0.90", which would be small block application.

        Good answer, thanks. :clapping:
        Mural Persuasion
        "OFFER THE GENTLEMAN A CIGAR, IF HE REFUSES, SHOOT THE SONOFABITCH".
        Mark Twain 1891

        Comment

        Working...
        X