No announcement yet.

What intake?

  • Filter
  • Time
  • Show
Clear All
new posts

  • What intake?

    Engine in question is a 440 with mildly ported 516 heads with 1.74 exhausts. Pocket ported and blended up into the ports, valve guide protrusion totally removed from exhaust side, intake side teardropped, hemi grind cam, stock pistons (.050 down) with steel shim gaskets, 10.3-1 compression. Engine will see a 3100 lb car with driver. Transmission will be automatic with 3000 converter. Have an M1 on the shelf for a low deck and am thinking if it will work fine I'll make some spacers to fit it.

  • #2
    If it were me, I'd buy a Super Victor for the RB instead of using an adapto kit for a low deck
    Visitors are encouraged to be Members, by registering.
    Members are encouraged to be Participants, by posting.
    Check out my Blog "Life & Times of an Old NSS Racer"


    • #3
      A good used TM7 tarantula would work nicely.


      • #4
        Street Dominator or Eddy RPM would work very good on that combo. Ron
        63 Sport Fury pump gas street car...10.76 @ 124.49 !
        My page on the cool 62 to 65 Mopar site .................


        • #5
          Talking to someone about an RPM......