Announcement

Collapse
No announcement yet.

Swap /6 for B-Block Question for 60 Plymouth

Collapse
X
  • Filter
  • Time
  • Show
Clear All
new posts

  • Swap /6 for B-Block Question for 60 Plymouth

    Click image for larger version

Name:	
Views:	1
Size:	32.0 KB
ID:	266436


    Has anyone ever swapped a 383 in place of the Leaning Tower of Power? I'm pretty familiar with 63 up Mopar engine swaps, but not the pre-K-frame 60-62s. The motor mounts that I can buy are like those pictured. My big question is where do you get the engine side brackets to the mounts and I'm sure it would make life way too easy if the frame side of the mount for a /6 and B-block being in the same location. So where can I get the motor mount brackets to weld to the frame? Anyone make a /6 to B-Block swap kit? Any advise is appreciated.

    Click image for larger version  Name:	54730348_129388258125950_3825046892555796480_n.jpg Views:	2 Size:	64.6 KB ID:	266437
    Click image for larger version  Name:	41613760_10212329293603201_109643303816790016_n.jpg Views:	1 Size:	75.6 KB ID:	266438
    Click image for larger version  Name:	41493201_10212329294683228_8809707050629070848_n.jpg Views:	1 Size:	72.2 KB ID:	266439
    Visitors are encouraged to be Members, by registering.
    Members are encouraged to be Participants, by posting.
    Check out my Blog "Life & Times of an Old NSS Racer"
Working...
X